Epoxy vloerhars 3 kg

Water-Clear – Two-component epoxy system (composed of 5 kg [11,02 lb] of resin and 3 kg [6,61 lb] of hardener) highly efficient for film application (1 mm [0,03”]) and castings up to 2 cm [0,78”] thickness. Besides the high transparency (water-clear) and the self-levelling properties, multipurpose transparent epoxy is a very versatile product for DIY and casting in silicone moulds. Furthermore, it guarantees a good mechanical seal for reinforcement and applications with carbon fibre. The product features a low viscosity that reduces the appearance of unaesthetic air bubbles after hardening and facilitates the impregnation of carbon fibre. The excellent resistance to ambient humidity guarantees a glossy and transparent surface. The product is compatible with the major colouring pastes on the market. Transparent Epoxy resin is a two-component product based on epoxy resins and relative amine hardener. The main features of this product are:  high transparency,  excellent mechanical strength,  good chemical resistance,  high impregnation and reinforcement of technical fabrics,  long working time,  glossy and self-levelling surface. The product can be coloured with any epoxy dye (both in paste and powder) in a percentage ranging from 0.1% to 2.0%). It can also be thickened by the use of aggregates such as powders and fumed silica. Thanks to these features, the transparent epoxy resin is ideal for the following applications: Modelling; Artistic creations; Fiberglass repairs; Outdoor protective coatings; Artistic flooring; Boat care and maintenance; Impregnation of technical fabrics (fiberglass, carbon fibre, Kevlar). Pot-life (150 gr at 30 C) [0,33 lb at 86 F]: 1h20 ′,  Full catalysis after 24h,  Film catalysis (1 mm at 30 C) [0,03” at 86 F]: 6h 00 ′.

Water-Clear – Two-component epoxy system (composed of 5+5 kg of resin and 3+3 kg of hardener) highly efficient for film application (1 mm [0,03”]) and castings up to 2 cm [0,78”] thickness. Besides the high transparency (water-clear) and the self-levelling properties, multipurpose transparent epoxy is a very versatile product for DIY and casting in silicone moulds. Furthermore, it guarantees a good mechanical seal for reinforcement and applications with carbon fibre. The product features a low viscosity that reduces the appearance of unaesthetic air bubbles after hardening and facilitates the impregnation of carbon fibre. The excellent resistance to ambient humidity guarantees a glossy and transparent surface. The product is compatible with the major colouring pastes on the market. Transparent Epoxy resin is a two-component product based on epoxy resins and relative amine hardener. The main features of this product are:  high transparency,  excellent mechanical strength,  good chemical resistance,  high impregnation and reinforcement of technical fabrics,  long working time,  glossy and self-levelling surface. The product can be coloured with any epoxy dye (both in paste and powder) in a percentage ranging from 0.1% to 2.0%). It can also be thickened by the use of aggregates such as powders and fumed silica. Thanks to these features, the transparent epoxy resin is ideal for the following applications: Modelling; Artistic creations; Fiberglass repairs; Outdoor protective coatings; Artistic flooring; Boat care and maintenance; Impregnation of technical fabrics (fiberglass, carbon fibre, Kevlar). Pot-life (150 gr at 30 C) [0,33 lb at 86 F]: 1h20 ′,  Full catalysis after 24h,  Film catalysis (1 mm at 30 C) [0,03” at 86 F]: 6h 00 ′.

Epoxymastiek MAGELSTIC Transparante tweecomponentenlak met zeer hoge mechanische en hechtingseigenschappen, weerbestendig en met een goede UV-bestendigheid. Sterk aanbevolen voor het lijmen en voegen van marmer, graniet, natuursteen en kunststeen. Dankzij de hoge thixotropie en de vrijwel afwezige krimp blinkt het product uit zowel bij verticale toepassingen als bij het herstellen van onvolkomenheden, zelfs van middelmatige/grote omvang.

SUPER OFFER! 32 KG [70,54 LB]: Non-toxic Ultra Transparent Epoxy Resin. IDEAL for + DIY + Surface coating + Wooden tables + Boat care and maintenance Water-Clear – Two-component epoxy system highly efficient for film application (1 mm [0,03”]) and castings up to 3 cm [1,18”] thickness. Besides the high transparency (water-clear) and the self-levelling properties, multipurpose transparent epoxy is a very versatile product for DIY and casting in silicone moulds. Furthermore, it guarantees a good mechanical seal for reinforcement and applications with carbon fibre. The product features a low viscosity that reduces the appearance of unaesthetic air bubbles after hardening and facilitates the impregnation of carbon fibre. The excellent resistance to ambient humidity guarantees a glossy and transparent surface. The product is compatible with the major colouring pastes on the market. Transparent Epoxy resin is a two-component product based on epoxy resins and relative amine hardener. The main features of this product are:  high transparency,  excellent mechanical strength,  good chemical resistance,  high impregnation and reinforcement of technical fabrics,  long working time,  glossy and self-levelling surface.  heat resistance - up to 70 C [158 F] The product can be coloured with any epoxy dye (both in paste and powder) in a percentage ranging from 0.1% to 2.0%). It can also be thickened by the use of aggregates such as powders and fumed silica. Thanks to these features, the transparent epoxy resin is ideal for the following applications: Modelling; Artistic creations; Fiberglass repairs; Outdoor protective coatings; Artistic flooring; Boat care and maintenance; Impregnation of technical fabrics (fiberglass, carbon fibre, Kevlar). Technical data: Pot-life (150 gr at 30 C) [0,33 lb at 86 F]: 1h20 ′, Full catalysis after 24h, Film catalysis (1 mm at 30 C) [0,03” at 86 F]: 6h 00 ′. Heat resistance - up to 70 C [158 F]