Resin outdoor vloeren catalogi

Water-Clear – Two-component epoxy system (composed of 5 kg [11,02 lb] of resin and 3 kg [6,61 lb] of hardener) highly efficient for film application (1 mm [0,03”]) and castings up to 2 cm [0,78”] thickness. Besides the high transparency (water-clear) and the self-levelling properties, multipurpose transparent epoxy is a very versatile product for DIY and casting in silicone moulds. Furthermore, it guarantees a good mechanical seal for reinforcement and applications with carbon fibre. The product features a low viscosity that reduces the appearance of unaesthetic air bubbles after hardening and facilitates the impregnation of carbon fibre. The excellent resistance to ambient humidity guarantees a glossy and transparent surface. The product is compatible with the major colouring pastes on the market. Transparent Epoxy resin is a two-component product based on epoxy resins and relative amine hardener. The main features of this product are:  high transparency,  excellent mechanical strength,  good chemical resistance,  high impregnation and reinforcement of technical fabrics,  long working time,  glossy and self-levelling surface. The product can be coloured with any epoxy dye (both in paste and powder) in a percentage ranging from 0.1% to 2.0%). It can also be thickened by the use of aggregates such as powders and fumed silica. Thanks to these features, the transparent epoxy resin is ideal for the following applications: Modelling; Artistic creations; Fiberglass repairs; Outdoor protective coatings; Artistic flooring; Boat care and maintenance; Impregnation of technical fabrics (fiberglass, carbon fibre, Kevlar). Pot-life (150 gr at 30 C) [0,33 lb at 86 F]: 1h20 ′,  Full catalysis after 24h,  Film catalysis (1 mm at 30 C) [0,03” at 86 F]: 6h 00 ′.

SUPER OFFER! 32 KG [70,54 LB]: Non-toxic Ultra Transparent Epoxy Resin. IDEAL for + DIY + Surface coating + Wooden tables + Boat care and maintenance Water-Clear – Two-component epoxy system highly efficient for film application (1 mm [0,03”]) and castings up to 3 cm [1,18”] thickness. Besides the high transparency (water-clear) and the self-levelling properties, multipurpose transparent epoxy is a very versatile product for DIY and casting in silicone moulds. Furthermore, it guarantees a good mechanical seal for reinforcement and applications with carbon fibre. The product features a low viscosity that reduces the appearance of unaesthetic air bubbles after hardening and facilitates the impregnation of carbon fibre. The excellent resistance to ambient humidity guarantees a glossy and transparent surface. The product is compatible with the major colouring pastes on the market. Transparent Epoxy resin is a two-component product based on epoxy resins and relative amine hardener. The main features of this product are:  high transparency,  excellent mechanical strength,  good chemical resistance,  high impregnation and reinforcement of technical fabrics,  long working time,  glossy and self-levelling surface.  heat resistance - up to 70 C [158 F] The product can be coloured with any epoxy dye (both in paste and powder) in a percentage ranging from 0.1% to 2.0%). It can also be thickened by the use of aggregates such as powders and fumed silica. Thanks to these features, the transparent epoxy resin is ideal for the following applications: Modelling; Artistic creations; Fiberglass repairs; Outdoor protective coatings; Artistic flooring; Boat care and maintenance; Impregnation of technical fabrics (fiberglass, carbon fibre, Kevlar). Technical data: Pot-life (150 gr at 30 C) [0,33 lb at 86 F]: 1h20 ′, Full catalysis after 24h, Film catalysis (1 mm at 30 C) [0,03” at 86 F]: 6h 00 ′. Heat resistance - up to 70 C [158 F]

"RESINSTONE" – Ééncomponent Methylacrylaathars voor Gestempelde Vloeren ÉÉNCOMPONENT METHYLACRYLAATHARS VOOR GESTEMPELDE VLOEREN – CONSOLIDEREND, WATERDICHT, STOFVRIJ EN ANTI-CARBONATIE BESCHERMEND COATING VOOR BETONVLOEREN “RESINSTONE” is een vloeibare, ééncomponentformule met lage viscositeit, speciaal ontworpen om diep in betonnen vloeren en oppervlakken te dringen via capillaire absorptie. Het biedt duurzame bescherming tegen vocht en verhoogt zowel de mechanische weerstand als de bescherming tegen chemische invloeden. De hars is verrijkt met geavanceerde methylacrylaatpolymeren en garandeert: ✔️ Consolidatie en bescherming van betonoppervlakken ✔️ Effectieve vochtwering ✔️ Weerstand tegen oliën, zuren en chemische stoffen (ook ideaal voor industriële omgevingen) ✔️ Verdieping en heropleving van de oorspronkelijke kleur van het beton Met “RESINSTONE” behandelde oppervlakken nemen geen water meer op en behouden een gepolijste, schone, stofvrije maar ademende afwerking. De coating is bestand tegen vergeling, reiniging en slechte weersomstandigheden, waaronder zure regen. BELANGRIJKSTE TOEPASSINGEN ✔️ Versteviging en bescherming van betonoppervlakken ✔️ Ideaal voor binnenruimtes zoals kelders, magazijnen, garages ✔️ Dankzij uitstekende UV-bestendigheid perfect voor buiten: opritten, parkeerplaatsen, tuinpaden, binnenplaatsen, enz. ✔️ Toepasbaar vanaf 8 uur na het storten van beton (na voorafgaande test) VOORDELEN ✅ Gebruiksklaar en eenvoudig aan te brengen (ééncomponent – gewoon gieten en laten drogen) ✅ Lage viscositeit voor diepe penetratie en versterking van het oppervlak ✅ Snelle droging: klaar in minder dan 12 uur ✅ Waterdicht maar dampdoorlatend – voorkomt vochtinsluiting ✅ Goede chemische bestendigheid tegen olie, vetten en zuren ✅ Toepasbaar bij temperaturen van +5°C tot +35°C ✅ Bestand tegen temperatuurschommelingen van -30°C tot +80°C ✅ Uitstekende mechanische eigenschappen en krasbestendigheid voor langdurig resultaat 🌿 Dierproefvrij & Vegan vriendelijk 🐹

Water-Clear – Two-component epoxy system (composed of 200 gr [0,44 lb] of resin and 120 gr [0,26 lb] of hardener) highly efficient for film application (1 mm [0,03”]) and castings up to 2 cm [0,78”] thickness. Besides the high transparency (water-clear) and the self-levelling properties, multipurpose transparent epoxy is a very versatile product for DIY and casting in silicone moulds. Furthermore, it guarantees a good mechanical seal for reinforcement and applications with carbon fibre. The product features a low viscosity that reduces the appearance of unaesthetic air bubbles after hardening and facilitates the impregnation of carbon fibre. The excellent resistance to ambient humidity guarantees a glossy and transparent surface. The product is compatible with the major colouring pastes on the market. Transparent Epoxy resin is a two-component product based on epoxy resins and relative amine hardener. The main features of this product are:  high transparency,  excellent mechanical strength,  good chemical resistance,  high impregnation and reinforcement of technical fabrics,  long working time,  glossy and self-levelling surface. The product can be coloured with any epoxy dye (both in paste and powder) in a percentage ranging from 0.1% to 2.0%. It can also be thickened by the use of aggregates such as powders and fumed silica. Thanks to these features, the transparent epoxy resin is ideal for the following applications: Modelling; Artistic creations; Fiberglass repairs; Outdoor protective coatings; Artistic flooring; Boat care and maintenance; Impregnation of technical fabrics (fiberglass, carbon fibre, Kevlar).