To achieve an optimal result in the application of the terrace, it is advisable to proceed with 2-3 layers of transparant epoxy or polyurethane resin. This type of coating ensures effective and long-lasting protection to the terrace floor, providing resistance to wear, stains, and liquid penetration. Before applying, make sure to properly prepare the surface by removing any impurities and sanding the substrate. Follow the manufacturer’s instructions carefully regarding the quantity of product to apply, drying times, and ideal environmental conditions. With correct execution, your terrace will be protected and aesthetically pleasing.

POLI SHIELD is a protective paint, final to protect your floors and surfaces in general from scratches and wear. Easy to apply, it is applied with a simple roller (or even spray) over any type of flooring. Particularly suitable for resin floors (epoxy, acrylic). POLI SHIED has been created to complete the M1-723 cycle in order to guarantee an aesthetic, easily washable and durable finish to surfaces. Available in glossy, satin or matt versions. ADVANTAGES: Resistant and Durable: The special acrylic-polyurethane polymers combine the stability and ease of application of acrylic resins with the scratch and tread resistance of the most advanced polyurethane polymers. Easy Application: Apply with a simple short-haired roller, foam roller or sprayer. Tools can be cleaned with simple soap and water. The two-component package is ready to use. Versatile and Elegant: POLI-SHIELD is available in different finishes: Gloss (100gloss), Satin (30 gloss) and Matt (5 gloss). It is compatible with a wide range of surfaces: Epoxy, Acrylic, Wood and Concrete and Textured finishes. Easy to maintain: The surface treated with POLI-SHIELD, becomes the variable with simple soap eliminating the absorption and proliferation of dirt and bacteria. If necessary, after even one year, it will be sufficient to pass a coat with a roller in the areas of major passage, to restore it and make it as bright as the first day! Cheep:  one pack (2.4 litres) covers up to 25m2 (with a double coat). Looking for an cheep, effective and easy-to-apply solution to protect and renew your floors and surfaces in general? POLI-SHIELD is the product for you!

“NextClear” is a professional two-component high-solid top coat. The professional two-component high-solid matte top coat “NextClear” has a high matting degree (gloss grade 9-12) and it’s highly scratch-resistant: it is used for the matte finish of resin and wooden tables. The matte “NextClear” can be used whenever you need a matte finish resistant to scratches, to aging, against yellowing, against chemical agents and against petrol. Recommended for resins that do not contain phosphorescent pigment, wood and various types of surfaces. Its unique properties fulfil the requirements for the protection, the sanding and the polishing of resins that do not contain phosphorescent pigment, wood and various types of surfaces. Properties: Scratch-resistant protective finish; Prevents the yellowing of the resin UV-resistant Easy to apply; Usable within 24 hours from activation (the duration can be even longer, depending on where it is stored). Completely dries after 48 hours The coverage of a canister is about 1.5 square meters. Warning: at first it develops a strong smell, which disappears once dried. Work in a ventilated area. Tips for use: Matte “NextClear” is packaged in a special spray canister that shall be activated only at the time of use. Top coat and hardener are already included in the canister as separate components; to initiate the catalysis procedure remove the red button from the cap of the canister, turn it upside down and firmly insert the button into the stem on the bottom. Shake the canister very well for a few minutes in order for the hardener to perfectly dissolve. Apply on the lightly sanded surface to allow the attachment. Apply 2 layers: it is essential to apply thin coats because while painting with matte finishes, if too much product builds up, there is the risk not to achieve a polished final result. It is therefore necessary to apply it homogeneously with a constant thickness to get a uniformly matte surface. The matte top coat completely dries after 48 hours (check below for further technical details). Use the content of the canister within 24 hours from activation (the duration can be even longer, depending on where it is stored). “NextClear” top coats are marked with the QUALITY EXTRA symbol, which labels all the items produced and tested directly by VerniciSpray to always ensure maximum performance. REMOVE WITH ACETONE AND/OR NITRO THINNER (before the product has completely dried).

Water-Clear – Two-component epoxy system (composed of 2000 g [4,40 lb] of resin and 1200 g [2,64 lb] of hardener) highly efficient for film application (1 mm [0,03”]) and castings up to 2 cm [0,78”] thickness. Besides the high transparency (water-clear) and the self-levelling properties, multipurpose transparent epoxy is a very versatile product for DIY and casting in silicone moulds. Furthermore, it guarantees a good mechanical seal for reinforcement and applications with carbon fibre. The product features a low viscosity that reduces the appearance of unaesthetic air bubbles after hardening and facilitates the impregnation of carbon fibre. The excellent resistance to ambient humidity guarantees a glossy and transparent surface.

“NextClear” is a professional two-component high-solid top coat. The glossy “NextClear” is a high-solid and high-gloss 2k top coat “NextClear”, the best solution to touch up a table with spray cans: it is highly resistant due to its high-solid characteristic and the high-gloss gives it maximum brilliance, two fundamental features for resins and wood. The two-component top coat, which shall be applied at the time of use, it’s perfect whenever a very polished resistant finish is necessary: glossy “NextClear” is UV- resistant as well as resistant to aging, against yellowing and against chemical agents. Recommended for resins that do not contain phosphorescent pigment, wood and various types of surfaces. Its unique properties fulfil the requirements for the protection, the sanding and the polishing of resins that do not contain phosphorescent pigment, wood and various types of surfaces. Properties: Scratch-resistant protective finish; Prevents the yellowing of the resin UV-resistant Easy to apply; Usable within 24 hours from activation (the duration can be even longer, depending on where it is stored). Completely dries after 48 hours The coverage of a canister is about 1 square meters. Warning: at first it develops a strong smell, which disappears once dried. Work in a ventilated area. Tips for use: “NextClear” shall be activated only at the time of use. Top coat and hardener are already included in the canister as separate components. To initiate the catalysis procedure, remove the red button from the cap of the canister, turn it upside down and firmly insert the button into the stem on the bottom. Shake the canister very well for a few minutes in order for the hardener to perfectly dissolve. Apply on the lightly sanded surface to allow the attachment, or. Apply 2 layers. The high-gloss top coat completely dries after 24 hours. Use the content of the canister within 24 hours from activation (the duration can be even longer, depending on where it is stored). “NextClear” top coats are marked with the QUALITY EXTRA symbol, which labels all the items produced and tested directly by ResinPro to always ensure maximum performance. REMOVE WITH ACETONE AND/OR NITRO THINNER (before the product has completely dried).