Emailadres: [email protected]

SUPER OFFER! 32 KG [70,54 LB]: Non-toxic Ultra Transparent Epoxy Resin. IDEAL for + DIY + Surface coating + Wooden tables + Boat care and maintenance Water-Clear – Two-component epoxy system highly efficient for film application (1 mm [0,03”]) and castings up to 3 cm [1,18”] thickness. Besides the high transparency (water-clear) and the self-levelling properties, multipurpose transparent epoxy is a very versatile product for DIY and casting in silicone moulds. Furthermore, it guarantees a good mechanical seal for reinforcement and applications with carbon fibre. The product features a low viscosity that reduces the appearance of unaesthetic air bubbles after hardening and facilitates the impregnation of carbon fibre. The excellent resistance to ambient humidity guarantees a glossy and transparent surface. The product is compatible with the major colouring pastes on the market. Transparent Epoxy resin is a two-component product based on epoxy resins and relative amine hardener. The main features of this product are:  high transparency,  excellent mechanical strength,  good chemical resistance,  high impregnation and reinforcement of technical fabrics,  long working time,  glossy and self-levelling surface.  heat resistance - up to 70 C [158 F] The product can be coloured with any epoxy dye (both in paste and powder) in a percentage ranging from 0.1% to 2.0%). It can also be thickened by the use of aggregates such as powders and fumed silica. Thanks to these features, the transparent epoxy resin is ideal for the following applications: Modelling; Artistic creations; Fiberglass repairs; Outdoor protective coatings; Artistic flooring; Boat care and maintenance; Impregnation of technical fabrics (fiberglass, carbon fibre, Kevlar). Technical data: Pot-life (150 gr at 30 C) [0,33 lb at 86 F]: 1h20 ′, Full catalysis after 24h, Film catalysis (1 mm at 30 C) [0,03” at 86 F]: 6h 00 ′. Heat resistance - up to 70 C [158 F]

Heat Pro Flexibele Hittebestendige Glanzende Coating De Heat Pro coating is een elastische polyurethaanhars die schokken en krassen absorbeert terwijl het een spiegelachtige glanzende afwerking behoudt. Speciaal ontworpen voor epoxyharsprojecten zoals tafels, onderzetters en lijsten, biedt het extreme hittebestendigheid tot 200°C—ideaal voor hete onderzetters en keukenbladen. 💥 Bestand tegen oppervlaktetemperaturen tot 200°C ☀️ Ingebouwde UV-bescherming om vergeling te voorkomen ✨ Eenvoudige mengverhouding van 100:75, geen toevoegingen nodig 🧪 Zelfnivellerend en transparant voor een professionele uitstraling Materiaalverbruik: 1,2 kg per 1 m² bij een laagdikte van 1 mm Aanbevolen oppervlak: tot 0,5 m² Gel tijd: ca. 3 uur Volledige uitharding: 24 uur bij kamertemperatuur Verbeter je harsprojecten met ultieme bescherming tegen hitte en krassen—kies nu Heat Pro voor een vlekkeloze, duurzame afwerking!  

Water-Clear – Two-component epoxy system (composed of 5+5 kg of resin and 3+3 kg of hardener) highly efficient for film application (1 mm [0,03”]) and castings up to 2 cm [0,78”] thickness. Besides the high transparency (water-clear) and the self-levelling properties, multipurpose transparent epoxy is a very versatile product for DIY and casting in silicone moulds. Furthermore, it guarantees a good mechanical seal for reinforcement and applications with carbon fibre. The product features a low viscosity that reduces the appearance of unaesthetic air bubbles after hardening and facilitates the impregnation of carbon fibre. The excellent resistance to ambient humidity guarantees a glossy and transparent surface. The product is compatible with the major colouring pastes on the market. Transparent Epoxy resin is a two-component product based on epoxy resins and relative amine hardener. The main features of this product are:  high transparency,  excellent mechanical strength,  good chemical resistance,  high impregnation and reinforcement of technical fabrics,  long working time,  glossy and self-levelling surface. The product can be coloured with any epoxy dye (both in paste and powder) in a percentage ranging from 0.1% to 2.0%). It can also be thickened by the use of aggregates such as powders and fumed silica. Thanks to these features, the transparent epoxy resin is ideal for the following applications: Modelling; Artistic creations; Fiberglass repairs; Outdoor protective coatings; Artistic flooring; Boat care and maintenance; Impregnation of technical fabrics (fiberglass, carbon fibre, Kevlar). Pot-life (150 gr at 30 C) [0,33 lb at 86 F]: 1h20 ′,  Full catalysis after 24h,  Film catalysis (1 mm at 30 C) [0,03” at 86 F]: 6h 00 ′.

PASTA VAN SILICONENRUBBER "I-GUM" - niet-giftig - twee-componenten A + B. Volledig niet-giftige, kneedbare pasta van siliconenrubber die rechtstreeks op het te reproduceren model wordt aangebracht. Voor gebruik moet het worden gemengd met de bijpassende verharderpasta (in gelijke delen, 1:1), tot een homogeen kleurmengsel is verkregen. Aangezien alle oppervlakken van een beschermende laag zijn voorzien, is het niet nodig het gereedschap na gebruik af te wassen en is het niet nodig het model in te vetten met andere reinigingsmiddelen. Technische kenmerken: +Viscositeit - Kneedbare pasta, + Bewerkingstijd 5/10 min; + Gewichtsverhouding A/B - 1:1; + Niet-giftig, + Hardheid - 30 Shore A.