Single-use Matte spray 400 ml [14,07 oz]

“NextClear” is a professional two-component high-solid top coat.
The professional two-component high-solid matte top coat “NextClear” has a high matting degree (gloss grade 9-12) and it’s highly scratch-resistant: it is used for the matte finish of resin and wooden tables.
The matte “NextClear” can be used whenever you need a matte finish resistant to scratches, to aging, against yellowing, against chemical agents and against petrol.
Recommended for resins that do not contain phosphorescent pigment, wood and various types of surfaces.
Its unique properties fulfil the requirements for the protection, the sanding and the polishing of resins that do not contain phosphorescent pigment, wood and various types of surfaces.

Properties:

• Scratch-resistant protective finish;
• Prevents the yellowing of the resin
• UV-resistant
• Easy to apply;
• Usable within 24 hours from activation (the duration can be even longer, depending on where it is stored).
• Completely dries after 48 hours

The coverage of a canister is about 1.5 square meters.

Warning: at first it develops a strong smell, which disappears once dried. Work in a ventilated area.

Tips for use: Matte “NextClear” is packaged in a special spray canister that shall be activated only at the time of use. Top coat and hardener are already included in the canister as separate components; to initiate the catalysis procedure remove the red button from the cap of the canister, turn it upside down and firmly insert the button into the stem on the bottom. Shake the canister very well for a few minutes in order for the hardener to perfectly dissolve. Apply on the lightly sanded surface to allow the attachment.

Apply 2 layers: it is essential to apply thin coats because while painting with matte finishes, if too much product builds up, there is the risk not to achieve a polished final result. It is therefore necessary to apply it homogeneously with a constant thickness to get a uniformly matte surface. The matte top coat completely dries after 48 hours (check below for further technical details). Use the content of the canister within 24 hours from activation (the duration can be even longer, depending on where it is stored).

“NextClear” top coats are marked with the QUALITY EXTRA symbol, which labels all the items produced and tested directly by VerniciSpray to always ensure maximum performance.

REMOVE WITH ACETONE AND/OR NITRO THINNER (before the product has completely dried).