Transparent spray 400 ml [14,07 oz]
€28,79
zo, 14. dec
Besteld
zo, 14. dec - ma, 15. dec
Bestelling verzonden
ma, 15. dec - wo, 17. dec
Geschatte levering
“NextClear” is a professional two-component high-solid top coat.
The glossy “NextClear” is a high-solid and high-gloss 2k top coat “NextClear”, the best solution to touch up a table with spray cans: it is highly resistant due to its high-solid characteristic and the high-gloss gives it maximum brilliance, two fundamental features for resins and wood.
The two-component top coat, which shall be applied at the time of use, it’s perfect whenever a very polished resistant finish is necessary: glossy “NextClear” is UV- resistant as well as resistant to aging, against yellowing and against chemical agents.
Recommended for resins that do not contain phosphorescent pigment, wood and various types of surfaces.
Its unique properties fulfil the requirements for the protection, the sanding and the polishing of resins that do not contain phosphorescent pigment, wood and various types of surfaces.
Properties:
- Scratch-resistant protective finish;
- Prevents the yellowing of the resin
- UV-resistant
- Easy to apply;
- Usable within 24 hours from activation (the duration can be even longer, depending on where it is stored).
- Completely dries after 48 hours
The coverage of a canister is about 1 square meters.
Warning: at first it develops a strong smell, which disappears once dried. Work in a ventilated area.
Tips for use: “NextClear” shall be activated only at the time of use. Top coat and hardener are already included in the canister as separate components. To initiate the catalysis procedure, remove the red button from the cap of the canister, turn it upside down and firmly insert the button into the stem on the bottom. Shake the canister very well for a few minutes in order for the hardener to perfectly dissolve. Apply on the lightly sanded surface to allow the attachment, or.
Apply 2 layers. The high-gloss top coat completely dries after 24 hours. Use the content of the canister within 24 hours from activation (the duration can be even longer, depending on where it is stored).
“NextClear” top coats are marked with the QUALITY EXTRA symbol, which labels all the items produced and tested directly by ResinPro to always ensure maximum performance.
REMOVE WITH ACETONE AND/OR NITRO THINNER (before the product has completely dried).
Beschrijving
“NextClear” is a professional two-component high-solid top coat.
The glossy “NextClear” is a high-solid and high-gloss 2k top coat “NextClear”, the best solution to touch up a table with spray cans: it is highly resistant due to its high-solid characteristic and the high-gloss gives it maximum brilliance, two fundamental features for resins and wood.
The two-component top coat, which shall be applied at the time of use, it’s perfect whenever a very polished resistant finish is necessary: glossy “NextClear” is UV- resistant as well as resistant to aging, against yellowing and against chemical agents.
Recommended for resins that do not contain phosphorescent pigment, wood and various types of surfaces.
Its unique properties fulfil the requirements for the protection, the sanding and the polishing of resins that do not contain phosphorescent pigment, wood and various types of surfaces.
Properties:
- Scratch-resistant protective finish;
- Prevents the yellowing of the resin
- UV-resistant
- Easy to apply;
- Usable within 24 hours from activation (the duration can be even longer, depending on where it is stored).
- Completely dries after 48 hours
The coverage of a canister is about 1 square meters.
Warning: at first it develops a strong smell, which disappears once dried. Work in a ventilated area.
Tips for use: “NextClear” shall be activated only at the time of use. Top coat and hardener are already included in the canister as separate components. To initiate the catalysis procedure, remove the red button from the cap of the canister, turn it upside down and firmly insert the button into the stem on the bottom. Shake the canister very well for a few minutes in order for the hardener to perfectly dissolve. Apply on the lightly sanded surface to allow the attachment, or.
Apply 2 layers. The high-gloss top coat completely dries after 24 hours. Use the content of the canister within 24 hours from activation (the duration can be even longer, depending on where it is stored).
“NextClear” top coats are marked with the QUALITY EXTRA symbol, which labels all the items produced and tested directly by ResinPro to always ensure maximum performance.
REMOVE WITH ACETONE AND/OR NITRO THINNER (before the product has completely dried).
Beoordelingen
Beoordelingen op ResinPro
Gebaseerd op 216 beoordelingen
aangedreven door
G
Geweldige kleurstoffen voor epoxyhars. Het resultaat is fantastisch!
L
Altijd goed contact wanneer ik vragen heb. Snelle en zorgvuldige levering. Perfect. Ik raad het aan.
A
Perfect, zoals gewoonlijk. Snelle levering. Producten met een uitstekende prijs-kwaliteitverhouding.
E
Een bedrijf dat ik aanbeveel, luistert goed en geeft uitstekend advies. Zeer goede kwaliteitsproducten.
R
Producten van hoge kwaliteit en ongelooflijk snelle levering.
Ik ben een professional en werk al jaren met ResinPro. Nooit teleurgesteld.
Ik beveel het aan.
E
Snelle levering, zeer responsieve klantenservice. Ik raad het aan.
S
Goed product en snelle verzending 👍
M
Zeer goed kwaliteitsproduct.
F
Nog steeds uitstekend
Kwaliteitsproducten en snelle levering
👌👌👌
F
Ik bestel al jaren en ben zeer tevreden over de kwaliteit van de hars en de snelle levering.
E
Zeer goede producten... snelle verzending.
E
Groot assortiment producten voor elk type creatie. Ik ben altijd snel en zonder problemen geleverd.
P
Zeer goede producten en een warme ontvangst met goed advies. Zeker aanbevolen.
H
Zeer goede hars, ik raad het aan. Verzonden in 5 dagen via Colissimo.
T
Hars van zeer goede kwaliteit en uitstekende klantenservice. Ik bestel alleen bij Resin Pro.
D
Een uitstekend en effectief product, altijd snel geleverd in een onberispelijke verpakking. Aanbevolen!
Ik koop alleen epoxyhars hier – de kwaliteit is uitstekend. Bovendien zijn er soms promoties waarmee je geld kunt besparen. De service en ondersteuning zijn altijd goed en reageren snel!
A
Altijd een goede ervaring en mijn pakket snel ontvangen.
A
Uitstekende producten.
R
Prachtige online winkel met unieke producten.
En dat alles met een vlekkeloze service.
C
Echte professionals in online verkoop. Snelle en zorgvuldige verzending. Koop met vertrouwen.
L
De producten die ik heb besteld, zijn binnen de verwachte termijn aangekomen. Het product is volledig conform en past perfect bij mijn project.
A
Kwalitatieve harsen net als de pigmenten, maar vooral de meest concurrerende prijs die ik heb kunnen vinden. Ik gebruik hun harsen al 2 jaar, eerst via Amazon en nu via hun site omdat het aanbod daar groter is en mijn behoeften technischer zijn.
E
Altijd goed advies. Snelle levering.
M
Bestelling van 1:1 epoxyhars
Goede kwaliteit en goede prijs-kwaliteitverhouding
Zeer snelle levering.
G
Gewoonweg perfecte hars.
“NextClear” is a professional two-component high-solid top coat.
The glossy “NextClear” is a high-solid and high-gloss 2k top coat “NextClear”, the best solution to touch up a table with spray cans: it is highly resistant due to its high-solid characteristic and the high-gloss gives it maximum brilliance, two fundamental features for resins and wood.
The two-component top coat, which shall be applied at the time of use, it’s perfect whenever a very polished resistant finish is necessary: glossy “NextClear” is UV- resistant as well as resistant to aging, against yellowing and against chemical agents.
Recommended for resins that do not contain phosphorescent pigment, wood and various types of surfaces.
Its unique properties fulfil the requirements for the protection, the sanding and the polishing of resins that do not contain phosphorescent pigment, wood and various types of surfaces.
Properties:
- Scratch-resistant protective finish;
- Prevents the yellowing of the resin
- UV-resistant
- Easy to apply;
- Usable within 24 hours from activation (the duration can be even longer, depending on where it is stored).
- Completely dries after 48 hours
The coverage of a canister is about 1 square meters.
Warning: at first it develops a strong smell, which disappears once dried. Work in a ventilated area.
Tips for use: “NextClear” shall be activated only at the time of use. Top coat and hardener are already included in the canister as separate components. To initiate the catalysis procedure, remove the red button from the cap of the canister, turn it upside down and firmly insert the button into the stem on the bottom. Shake the canister very well for a few minutes in order for the hardener to perfectly dissolve. Apply on the lightly sanded surface to allow the attachment, or.
Apply 2 layers. The high-gloss top coat completely dries after 24 hours. Use the content of the canister within 24 hours from activation (the duration can be even longer, depending on where it is stored).
“NextClear” top coats are marked with the QUALITY EXTRA symbol, which labels all the items produced and tested directly by ResinPro to always ensure maximum performance.
REMOVE WITH ACETONE AND/OR NITRO THINNER (before the product has completely dried).
Gebaseerd op 216 beoordelingen
aangedreven door
Ik koop alleen epoxyhars hier – de kwaliteit is uitstekend. Bovendien zijn er soms promoties waarmee je geld kunt besparen. De service en ondersteuning zijn altijd goed en reageren snel!
C
Echte professionals in online verkoop. Snelle en zorgvuldige verzending. Koop met vertrouwen.
E
Groot assortiment producten voor elk type creatie. Ik ben altijd snel en zonder problemen geleverd.
A
Uitstekende producten.
M
Bestelling van 1:1 epoxyhars
Goede kwaliteit en goede prijs-kwaliteitverhouding
Zeer snelle levering.
L
Altijd goed contact wanneer ik vragen heb. Snelle en zorgvuldige levering. Perfect. Ik raad het aan.
E
Snelle levering, zeer responsieve klantenservice. Ik raad het aan.
F
Ik bestel al jaren en ben zeer tevreden over de kwaliteit van de hars en de snelle levering.
E
Altijd goed advies. Snelle levering.
A
Perfect, zoals gewoonlijk. Snelle levering. Producten met een uitstekende prijs-kwaliteitverhouding.
P
Zeer goede producten en een warme ontvangst met goed advies. Zeker aanbevolen.
A
Kwalitatieve harsen net als de pigmenten, maar vooral de meest concurrerende prijs die ik heb kunnen vinden. Ik gebruik hun harsen al 2 jaar, eerst via Amazon en nu via hun site omdat het aanbod daar groter is en mijn behoeften technischer zijn.
G
Gewoonweg perfecte hars.
T
Hars van zeer goede kwaliteit en uitstekende klantenservice. Ik bestel alleen bij Resin Pro.
H
Zeer goede hars, ik raad het aan. Verzonden in 5 dagen via Colissimo.
A
Altijd een goede ervaring en mijn pakket snel ontvangen.
L
De producten die ik heb besteld, zijn binnen de verwachte termijn aangekomen. Het product is volledig conform en past perfect bij mijn project.
F
Nog steeds uitstekend
Kwaliteitsproducten en snelle levering
👌👌👌
G
Geweldige kleurstoffen voor epoxyhars. Het resultaat is fantastisch!
S
Goed product en snelle verzending 👍
M
Zeer goed kwaliteitsproduct.
R
Producten van hoge kwaliteit en ongelooflijk snelle levering.
Ik ben een professional en werk al jaren met ResinPro. Nooit teleurgesteld.
Ik beveel het aan.
R
Prachtige online winkel met unieke producten.
En dat alles met een vlekkeloze service.
E
Een bedrijf dat ik aanbeveel, luistert goed en geeft uitstekend advies. Zeer goede kwaliteitsproducten.
E
Zeer goede producten... snelle verzending.
D
Een uitstekend en effectief product, altijd snel geleverd in een onberispelijke verpakking. Aanbevolen!
COD:
NextClearlucidobicomponente
Google
