Come verniciare una vasca in resina

SUPER OFFER! 32 KG [70,54 LB]: Non-toxic Ultra Transparent Epoxy Resin. IDEAL for + DIY + Surface coating + Wooden tables + Boat care and maintenance Water-Clear – Two-component epoxy system highly efficient for film application (1 mm [0,03”]) and castings up to 3 cm [1,18”] thickness. Besides the high transparency (water-clear) and the self-levelling properties, multipurpose transparent epoxy is a very versatile product for DIY and casting in silicone moulds. Furthermore, it guarantees a good mechanical seal for reinforcement and applications with carbon fibre. The product features a low viscosity that reduces the appearance of unaesthetic air bubbles after hardening and facilitates the impregnation of carbon fibre. The excellent resistance to ambient humidity guarantees a glossy and transparent surface. The product is compatible with the major colouring pastes on the market. Transparent Epoxy resin is a two-component product based on epoxy resins and relative amine hardener. The main features of this product are:  high transparency,  excellent mechanical strength,  good chemical resistance,  high impregnation and reinforcement of technical fabrics,  long working time,  glossy and self-levelling surface.  heat resistance - up to 70 C [158 F] The product can be coloured with any epoxy dye (both in paste and powder) in a percentage ranging from 0.1% to 2.0%). It can also be thickened by the use of aggregates such as powders and fumed silica. Thanks to these features, the transparent epoxy resin is ideal for the following applications: Modelling; Artistic creations; Fiberglass repairs; Outdoor protective coatings; Artistic flooring; Boat care and maintenance; Impregnation of technical fabrics (fiberglass, carbon fibre, Kevlar). Technical data: Pot-life (150 gr at 30 C) [0,33 lb at 86 F]: 1h20 ′, Full catalysis after 24h, Film catalysis (1 mm at 30 C) [0,03” at 86 F]: 6h 00 ′. Heat resistance - up to 70 C [158 F]

Water-Clear – Two-component epoxy system (composed of 5+5 kg of resin and 3+3 kg of hardener) highly efficient for film application (1 mm [0,03”]) and castings up to 2 cm [0,78”] thickness. Besides the high transparency (water-clear) and the self-levelling properties, multipurpose transparent epoxy is a very versatile product for DIY and casting in silicone moulds. Furthermore, it guarantees a good mechanical seal for reinforcement and applications with carbon fibre. The product features a low viscosity that reduces the appearance of unaesthetic air bubbles after hardening and facilitates the impregnation of carbon fibre. The excellent resistance to ambient humidity guarantees a glossy and transparent surface. The product is compatible with the major colouring pastes on the market. Transparent Epoxy resin is a two-component product based on epoxy resins and relative amine hardener. The main features of this product are:  high transparency,  excellent mechanical strength,  good chemical resistance,  high impregnation and reinforcement of technical fabrics,  long working time,  glossy and self-levelling surface. The product can be coloured with any epoxy dye (both in paste and powder) in a percentage ranging from 0.1% to 2.0%). It can also be thickened by the use of aggregates such as powders and fumed silica. Thanks to these features, the transparent epoxy resin is ideal for the following applications: Modelling; Artistic creations; Fiberglass repairs; Outdoor protective coatings; Artistic flooring; Boat care and maintenance; Impregnation of technical fabrics (fiberglass, carbon fibre, Kevlar). Pot-life (150 gr at 30 C) [0,33 lb at 86 F]: 1h20 ′,  Full catalysis after 24h,  Film catalysis (1 mm at 30 C) [0,03” at 86 F]: 6h 00 ′.

KIT EPOXY TABLE  FINALMENTE IL KIT COMPLETO PER CREARE IL TUO TAVOLO IN LEGNO E RESINA! Troverai tutto l’occorrente per creare il contenitore, la resina e la lucidatura finale Incluse le istruzioni dettagliate per creare la cassaforma, ed i trucchi per colare la resina, in pochi semplici passi. Grazie alla nuova pellicola distaccante “Shiny Shield” creare un tavolo non è mai stato cosi semplice. Non hai più scuse, scegli la dimensione che fa per te: Beginner , PRO o … XXL! KIT EPOXYTABLE BEGINNER PER CREARE IL TAVOLO IN LEGNO E RESINA EPOSSIDICA FIUME CON ISTRUZIONI DETTAGLIATE Non hai esperienza ma hai sempre voluto un bellissimo e moderno tavolo in legno e resina?   Ecco finalmente la soluzione, senza spendere una fortuna! Il kit BEGINNER ti permetterà di creare facilmente e velocemente il tuo tavolo in legno e resina.   Il KIT BEGINNER comprende: 8 kg resina epossidica Trasparente per colate fino a 2 cm Pellicola distaccante, lucida “Shiny Shield” (sufficienti per una superficie di 0,5 m2) Silicone in pasta atossico per sigillare (500g) KIT lucidante (set dischi lucidanti + pasta lucidante professionale 3M) Istruzioni dettagliate per creare passo passo la cassaforma e colare la resina. Il kit BEGINNER è sufficiente per creare un tavolo con una superficie di 0,5 m2 (es. 50 cm x 90 cm, spessore 2cm)*. Il KIT PRO comprende: 16 kg resina epossidica Trasparente per colate fino a 2 cm Pellicola distaccante, lucida “Shiny Shield” (sufficienti per una superficie di 1 m2) Silicone in pasta atossico per sigillare (500g) KIT lucidante (set dischi lucidanti + pasta lucidante professionale 3M) Istruzioni dettagliate per creare passo passo la cassaforma e colare la resina. Il kit PRO è sufficiente per creare un tavolo con una superficie di 1 m2 (es. 120 cm x 80cm, spessore 2cm)*.   Il KIT XXL comprende: 32 kg resina epossidica Trasparente per colate fino a 2 cm Pellicola distaccante, lucida “Shiny Shield” (sufficienti per una superficie di 2 m2) Silicone in pasta atossico per sigillare (500g) KIT lucidante (set dischi lucidanti + pasta lucidante professionale 3M) Istruzioni dettagliate per creare passo passo la cassaforma e colare la resina. Il kit PRO è sufficiente per creare un tavolo con una superficie di 2 m2 (es. 110 cm x 180cm, spessore 2cm)*. *Le quantità sono calcolate simulando un tavolo “classico” in cui il volume è suddiviso in 2/3 legno ed 1/3 resina: Per ogni dubbio od un semplice consiglio contatta il reparto tecnico ResinPro al 333 4819266!

Colouring pastes Set for epoxy and polyurethane resins - 5 * 25 ml [0,87 oz] - RESIN PRO  Usable to colour the products of the RESIN PRO range. Add the colour to Component A until you get the desired shade. It is possible to mix different colours to get the chromatic effect you want. For example, by mixing Red and White, you will get Pink. The suggested percentages range from 0,1% (semi-transparent effect) to maximum 5% (for intense colour and dense coverage) . Do not use in higher percentages to avoid affecting resin catalysis. From 0,1% to 5 % depending upon the desired transparency. Shake well before using!   COLOURS: + White + Black + Red + Yellow + Blue Shake well before using!