Kleurtechnieken pigmenten resin

Water-Clear – Two-component epoxy system (composed of 5 kg [11,02 lb] of resin and 3 kg [6,61 lb] of hardener) highly efficient for film application (1 mm [0,03”]) and castings up to 2 cm [0,78”] thickness. Besides the high transparency (water-clear) and the self-levelling properties, multipurpose transparent epoxy is a very versatile product for DIY and casting in silicone moulds. Furthermore, it guarantees a good mechanical seal for reinforcement and applications with carbon fibre. The product features a low viscosity that reduces the appearance of unaesthetic air bubbles after hardening and facilitates the impregnation of carbon fibre. The excellent resistance to ambient humidity guarantees a glossy and transparent surface. The product is compatible with the major colouring pastes on the market. Transparent Epoxy resin is a two-component product based on epoxy resins and relative amine hardener. The main features of this product are:  high transparency,  excellent mechanical strength,  good chemical resistance,  high impregnation and reinforcement of technical fabrics,  long working time,  glossy and self-levelling surface. The product can be coloured with any epoxy dye (both in paste and powder) in a percentage ranging from 0.1% to 2.0%). It can also be thickened by the use of aggregates such as powders and fumed silica. Thanks to these features, the transparent epoxy resin is ideal for the following applications: Modelling; Artistic creations; Fiberglass repairs; Outdoor protective coatings; Artistic flooring; Boat care and maintenance; Impregnation of technical fabrics (fiberglass, carbon fibre, Kevlar). Pot-life (150 gr at 30 C) [0,33 lb at 86 F]: 1h20 ′,  Full catalysis after 24h,  Film catalysis (1 mm at 30 C) [0,03” at 86 F]: 6h 00 ′.

10 nieuwe Metallic kleuren! (10 x 10 gr)  PIGMENTEN OP BASIS VAN KLEUR, ideaal voor snijden, decoreren en alles wat met doe-het-zelf te maken heeft. Door ze simpelweg toe te voegen aan harsen, verven of vernissen, kunt u uw creativiteit uiten door middel van echt levendige tinten.  Hoogglans metaalpigmenten die compatibel zijn met epoxyharsen, acryl, polyurethanen, verven en elk artistiek materiaal. Ideaal voor het maken van harstafels, handgemaakte creaties, ambachtelijke meubels. Door 2-3 pigmenten met elkaar te mengen, krijg je fantastische nieuwe tinten. Hierdoor kan het "geaderde" effect worden verkregen (zie foto). Niet giftig: u hoeft zich geen zorgen te maken over het gebruik ervan voor creaties, artistiek of ambachtelijk werk. Gemaakt van niet-giftige materialen, voel je vrij om het te gebruiken.  Uitstekend geschikt voor huisdecoratie, het maken van sieraden, kledingaccessoires en ander handwerk. Wordt gebruikt om houten en harstafels te bekleden, om verven op harsbasis te maken.  Set bevat: Blauw, Wit, Paars, Rijk Goud, Lichtgoud, Brons, Lichtblauw, Groen, Groenblauw, Goud.

6 nieuwe pastelkleuren! 🌈 KLEURBASIS PIGMENTEN, ideaal voor découpage, decoratie en al uw creatieve doe-het- zelfprojecten. Voeg ze eenvoudig toe aan harsen, verven of lakken en breng uw creativiteit tot leven met echt levendige tinten (neon-effect!). ⚠️ Let op: Deze pigmenten lichten niet op in het donker. Ze zijn niet fosforescerend.

Water-Clear – Two-component epoxy system (composed of 200 gr [0,44 lb] of resin and 120 gr [0,26 lb] of hardener) highly efficient for film application (1 mm [0,03”]) and castings up to 2 cm [0,78”] thickness. Besides the high transparency (water-clear) and the self-levelling properties, multipurpose transparent epoxy is a very versatile product for DIY and casting in silicone moulds. Furthermore, it guarantees a good mechanical seal for reinforcement and applications with carbon fibre. The product features a low viscosity that reduces the appearance of unaesthetic air bubbles after hardening and facilitates the impregnation of carbon fibre. The excellent resistance to ambient humidity guarantees a glossy and transparent surface. The product is compatible with the major colouring pastes on the market. Transparent Epoxy resin is a two-component product based on epoxy resins and relative amine hardener. The main features of this product are:  high transparency,  excellent mechanical strength,  good chemical resistance,  high impregnation and reinforcement of technical fabrics,  long working time,  glossy and self-levelling surface. The product can be coloured with any epoxy dye (both in paste and powder) in a percentage ranging from 0.1% to 2.0%. It can also be thickened by the use of aggregates such as powders and fumed silica. Thanks to these features, the transparent epoxy resin is ideal for the following applications: Modelling; Artistic creations; Fiberglass repairs; Outdoor protective coatings; Artistic flooring; Boat care and maintenance; Impregnation of technical fabrics (fiberglass, carbon fibre, Kevlar).