Ontvettingsmiddel voorbereiding: resin clean

Intense en briljante kleur, ideaal voor transparante epoxyharsen. Meng een kleine hoeveelheid voor een transparant effect. De hoge dekkracht van de “Colorfun Deluxe”-serie zorgt voor een volle en heldere kleur. Door de hoge concentratie kun je met slechts een paar druppels een dekkende kleur krijgen. Geschikt om de producten van de RESIN PRO-serie te kleuren. Het aanbevolen percentage kleurpigment ten opzichte van de totale hoeveelheid hars varieert van 1% (transparant effect) tot 5% (voor intense en dekkende kleuren). Gebruik niet meer dan 5% kleurstof van de totale harsmassa! 🌿 Dierproefvrij, Veganistisch Vriendelijk 🐹

Water-Clear – Two-component epoxy system (composed of 5 kg [11,02 lb] of resin and 3 kg [6,61 lb] of hardener) highly efficient for film application (1 mm [0,03”]) and castings up to 2 cm [0,78”] thickness. Besides the high transparency (water-clear) and the self-levelling properties, multipurpose transparent epoxy is a very versatile product for DIY and casting in silicone moulds. Furthermore, it guarantees a good mechanical seal for reinforcement and applications with carbon fibre. The product features a low viscosity that reduces the appearance of unaesthetic air bubbles after hardening and facilitates the impregnation of carbon fibre. The excellent resistance to ambient humidity guarantees a glossy and transparent surface. The product is compatible with the major colouring pastes on the market. Transparent Epoxy resin is a two-component product based on epoxy resins and relative amine hardener. The main features of this product are:  high transparency,  excellent mechanical strength,  good chemical resistance,  high impregnation and reinforcement of technical fabrics,  long working time,  glossy and self-levelling surface. The product can be coloured with any epoxy dye (both in paste and powder) in a percentage ranging from 0.1% to 2.0%). It can also be thickened by the use of aggregates such as powders and fumed silica. Thanks to these features, the transparent epoxy resin is ideal for the following applications: Modelling; Artistic creations; Fiberglass repairs; Outdoor protective coatings; Artistic flooring; Boat care and maintenance; Impregnation of technical fabrics (fiberglass, carbon fibre, Kevlar). Pot-life (150 gr at 30 C) [0,33 lb at 86 F]: 1h20 ′,  Full catalysis after 24h,  Film catalysis (1 mm at 30 C) [0,03” at 86 F]: 6h 00 ′.

NATU🍀RESIN is een tweecomponenten watergedragen acrylpolymeer / minerale hars. 🌱 milieuvriendelijk 🌱 niet-toxisch 🌱 VOC-vrij 🌱 veganistisch 🌱 zonder oplosmiddelen 🌱 mineraal product NATU🍀RESIN is de nieuwe innovatie van ResinPro voor al jouw creaties: eenvoudig in gebruik, oplosmiddelvrij en volledig niet-toxisch! Het product is perfect voor het maken van dienbladen, onderzetters, asbakken, borden, sieradendozen, bloempotten, snijplanken, kaarshouders, telefoonhouders en diverse voorwerpen voor thuis en op kantoor! NATU🍀RESIN garandeert bovendien een hardheid en weerstand die het ideaal maken voor creaties die bestand moeten zijn tegen weersomstandigheden en buiten gebruikt worden. Het kan worden gekleurd met een breed scala aan ResinPro-kleuren en -pigmenten en kan, zodra het uitgehard is, met elke gewenste kleur worden geverfd!

Water-Clear – Two-component epoxy system (composed of 200 gr [0,44 lb] of resin and 120 gr [0,26 lb] of hardener) highly efficient for film application (1 mm [0,03”]) and castings up to 2 cm [0,78”] thickness. Besides the high transparency (water-clear) and the self-levelling properties, multipurpose transparent epoxy is a very versatile product for DIY and casting in silicone moulds. Furthermore, it guarantees a good mechanical seal for reinforcement and applications with carbon fibre. The product features a low viscosity that reduces the appearance of unaesthetic air bubbles after hardening and facilitates the impregnation of carbon fibre. The excellent resistance to ambient humidity guarantees a glossy and transparent surface. The product is compatible with the major colouring pastes on the market. Transparent Epoxy resin is a two-component product based on epoxy resins and relative amine hardener. The main features of this product are:  high transparency,  excellent mechanical strength,  good chemical resistance,  high impregnation and reinforcement of technical fabrics,  long working time,  glossy and self-levelling surface. The product can be coloured with any epoxy dye (both in paste and powder) in a percentage ranging from 0.1% to 2.0%. It can also be thickened by the use of aggregates such as powders and fumed silica. Thanks to these features, the transparent epoxy resin is ideal for the following applications: Modelling; Artistic creations; Fiberglass repairs; Outdoor protective coatings; Artistic flooring; Boat care and maintenance; Impregnation of technical fabrics (fiberglass, carbon fibre, Kevlar).

One-component alcohol-based liquid to be added in drops over ink in order to obtain new amazing shades.

SUPER OFFER! 32 KG [70,54 LB]: Non-toxic Ultra Transparent Epoxy Resin. IDEAL for + DIY + Surface coating + Wooden tables + Boat care and maintenance Water-Clear – Two-component epoxy system highly efficient for film application (1 mm [0,03”]) and castings up to 3 cm [1,18”] thickness. Besides the high transparency (water-clear) and the self-levelling properties, multipurpose transparent epoxy is a very versatile product for DIY and casting in silicone moulds. Furthermore, it guarantees a good mechanical seal for reinforcement and applications with carbon fibre. The product features a low viscosity that reduces the appearance of unaesthetic air bubbles after hardening and facilitates the impregnation of carbon fibre. The excellent resistance to ambient humidity guarantees a glossy and transparent surface. The product is compatible with the major colouring pastes on the market. Transparent Epoxy resin is a two-component product based on epoxy resins and relative amine hardener. The main features of this product are:  high transparency,  excellent mechanical strength,  good chemical resistance,  high impregnation and reinforcement of technical fabrics,  long working time,  glossy and self-levelling surface.  heat resistance - up to 70 C [158 F] The product can be coloured with any epoxy dye (both in paste and powder) in a percentage ranging from 0.1% to 2.0%). It can also be thickened by the use of aggregates such as powders and fumed silica. Thanks to these features, the transparent epoxy resin is ideal for the following applications: Modelling; Artistic creations; Fiberglass repairs; Outdoor protective coatings; Artistic flooring; Boat care and maintenance; Impregnation of technical fabrics (fiberglass, carbon fibre, Kevlar). Technical data: Pot-life (150 gr at 30 C) [0,33 lb at 86 F]: 1h20 ′, Full catalysis after 24h, Film catalysis (1 mm at 30 C) [0,03” at 86 F]: 6h 00 ′. Heat resistance - up to 70 C [158 F]

“1K NEXTCOLOR K300” top coat is the best product on the market within the category of one-component top coats, which are also known as 1K. Due to its unique physicochemical properties, “NEXTCOLOR K300” is particularly suitable as a polished finish for resins and wood. “NEXTCOLOR K300” stands out for its glossiness, its resistance to scratches and to almost all detergents (even the most aggressive), its non-yellowing and its UV resistance. Recommended for resins that do not contain phosphorescent pigment, wood and various types of surfaces. Its unique properties fulfil the requirements for the protection, the sanding and the polishing of resins that do not contain phosphorescent pigment, wood and various types of surfaces. Properties: Scratch-resistant protective finish; Prevents the yellowing of the resin UV-resistant Easy to apply; Reusable multiple times The coverage of a canister is about 1-1.5 square meters. Warning: at first it develops a strong smell, which disappears once dried. Work in a ventilated area. Use: We suggest to shake well for a few minutes. The temperature of the canister should be 20°/25°C [68/77 F]. Spray the product evenly and crossways on the surface to be painted at a distance of about 15-20 cm [5,90”/7,87”]. To prevent sagging, repeatedly apply in thin layers with timed intervals (about 15-20 minutes), always using the top coat on the varnish when not too dry. For a perfect application, you can use the “MAGNUM” handle that allows you to apply the paint with greater precision. REMOVE THE VARNISH WITH ACETONE AND/OR NITRO THINNER.

"RAPHAEL" KIT for Pour Paint & Resin Art Create your unique painting with the "RAPHAEL" kit. Experience the countless mixtures and design the perfect artwork! The "RAPHAEL" KIT includes: - TRANSPARENT RESIN FOR ARTWORK AND DIY 1.66 KG [3,65 LB] - NEON PIGMENTS SET ART PRO, the epoxy resin for the artistic sector: thanks to its special formula and its dense structure, it allows you to create paintings with the "pour paint" and liquid paint technique. It does not leak out from the working surface, slowly reaching the corners of the frame. ART PRO preserves your original design and prevents any possible modification due to the casting of the resin: because of its special formula, the layers of colours do not expand and do not mix (unless you deliberately intervene), faithfully keeping with your creative idea!