Reiniger für epoxidharzschmuckanwendungen

De transparante 1K spray "NextGlow K300" is de ideale bescherming voor harsen gemengd met fosforescerende (fotoluminescente) en fluorescerende pigmenten, en fosforescerende verven. Aanbevolen alleen voor harsen gemengd met fosforescerende (fotoluminescente) en fluorescerende pigmenten. Unieke eigenschappen voor bescherming, schuren en polijsten van speciale verven zoals fosforescerend en fluorescerend. Kenmerken: Krasbestendige beschermlaag Verloopt niet door UV-straling Gemakkelijk aan te brengen Meermalig herbruikbaar De beschermlaag is glanzend en egaal en laat UV-straling door, wat essentieel is voor fosforescerende en fluorescerende verven. Fysisch-chemische eigenschappen maken het oppervlak bestand tegen benzine, koolwaterstoffen, alcohol en agressieve reinigers. Ook uitstekend krasbestendig, vergeelt niet en wordt niet aangetast door UV. Geschikt voor binnen- en buitengebruik. Dekking per spuitbus: ca. 1–1,5 m². Kan worden gemaakt met een CFC-vrije drijfgas. Let op: eerst geur bij gebruik die verdwijnt na droging. Gebruik in een goed geventileerde ruimte.

Water-Clear – Two-component epoxy system (composed of 5 kg [11,02 lb] of resin and 3 kg [6,61 lb] of hardener) highly efficient for film application (1 mm [0,03”]) and castings up to 2 cm [0,78”] thickness. Besides the high transparency (water-clear) and the self-levelling properties, multipurpose transparent epoxy is a very versatile product for DIY and casting in silicone moulds. Furthermore, it guarantees a good mechanical seal for reinforcement and applications with carbon fibre. The product features a low viscosity that reduces the appearance of unaesthetic air bubbles after hardening and facilitates the impregnation of carbon fibre. The excellent resistance to ambient humidity guarantees a glossy and transparent surface. The product is compatible with the major colouring pastes on the market. Transparent Epoxy resin is a two-component product based on epoxy resins and relative amine hardener. The main features of this product are:  high transparency,  excellent mechanical strength,  good chemical resistance,  high impregnation and reinforcement of technical fabrics,  long working time,  glossy and self-levelling surface. The product can be coloured with any epoxy dye (both in paste and powder) in a percentage ranging from 0.1% to 2.0%). It can also be thickened by the use of aggregates such as powders and fumed silica. Thanks to these features, the transparent epoxy resin is ideal for the following applications: Modelling; Artistic creations; Fiberglass repairs; Outdoor protective coatings; Artistic flooring; Boat care and maintenance; Impregnation of technical fabrics (fiberglass, carbon fibre, Kevlar). Pot-life (150 gr at 30 C) [0,33 lb at 86 F]: 1h20 ′,  Full catalysis after 24h,  Film catalysis (1 mm at 30 C) [0,03” at 86 F]: 6h 00 ′.

SILICONEN MAL VOOR HANDWERK. Eenvoudig in gebruik, hoogglans afgewerkt en perfect voor het maken van prachtige sieraden of decoraties. Geschikt voor gebruik met zeep, gips, hars, ijs, keramiek, klei, was en andere materialen geschikt voor doe-het-zelfprojecten. Mallen voor objecten, sieraden en chocolade. DO-IT-YOURSELF. Materiaal: Siliconen Kleur: Semi-transparant Herbruikbaar Anti-aanbak Eenvoudig in gebruik en schoon te maken Afmetingen van elke mal: 28 x 20 MM [1,10” x 0,78”] Waarschuwing: Gebruik geen agressieve oplosmiddelen. Hoogwaardige mallen, hittebestendig: -40°C tot +210°C [-104°F tot +410°F].

SUPER OFFER! 32 KG [70,54 LB]: Non-toxic Ultra Transparent Epoxy Resin. IDEAL for + DIY + Surface coating + Wooden tables + Boat care and maintenance Water-Clear – Two-component epoxy system highly efficient for film application (1 mm [0,03”]) and castings up to 3 cm [1,18”] thickness. Besides the high transparency (water-clear) and the self-levelling properties, multipurpose transparent epoxy is a very versatile product for DIY and casting in silicone moulds. Furthermore, it guarantees a good mechanical seal for reinforcement and applications with carbon fibre. The product features a low viscosity that reduces the appearance of unaesthetic air bubbles after hardening and facilitates the impregnation of carbon fibre. The excellent resistance to ambient humidity guarantees a glossy and transparent surface. The product is compatible with the major colouring pastes on the market. Transparent Epoxy resin is a two-component product based on epoxy resins and relative amine hardener. The main features of this product are:  high transparency,  excellent mechanical strength,  good chemical resistance,  high impregnation and reinforcement of technical fabrics,  long working time,  glossy and self-levelling surface.  heat resistance - up to 70 C [158 F] The product can be coloured with any epoxy dye (both in paste and powder) in a percentage ranging from 0.1% to 2.0%). It can also be thickened by the use of aggregates such as powders and fumed silica. Thanks to these features, the transparent epoxy resin is ideal for the following applications: Modelling; Artistic creations; Fiberglass repairs; Outdoor protective coatings; Artistic flooring; Boat care and maintenance; Impregnation of technical fabrics (fiberglass, carbon fibre, Kevlar). Technical data: Pot-life (150 gr at 30 C) [0,33 lb at 86 F]: 1h20 ′, Full catalysis after 24h, Film catalysis (1 mm at 30 C) [0,03” at 86 F]: 6h 00 ′. Heat resistance - up to 70 C [158 F]