Neutrale en diepwerkend lossingsmiddel spray

“1K NEXTCOLOR K300” top coat is the best product on the market within the category of one-component top coats, which are also known as 1K. Due to its unique physicochemical properties, “NEXTCOLOR K300” is particularly suitable as a polished finish for resins and wood. “NEXTCOLOR K300” stands out for its glossiness, its resistance to scratches and to almost all detergents (even the most aggressive), its non-yellowing and its UV resistance. Recommended for resins that do not contain phosphorescent pigment, wood and various types of surfaces. Its unique properties fulfil the requirements for the protection, the sanding and the polishing of resins that do not contain phosphorescent pigment, wood and various types of surfaces. Properties: Scratch-resistant protective finish; Prevents the yellowing of the resin UV-resistant Easy to apply; Reusable multiple times The coverage of a canister is about 1-1.5 square meters. Warning: at first it develops a strong smell, which disappears once dried. Work in a ventilated area. Use: We suggest to shake well for a few minutes. The temperature of the canister should be 20°/25°C [68/77 F]. Spray the product evenly and crossways on the surface to be painted at a distance of about 15-20 cm [5,90”/7,87”]. To prevent sagging, repeatedly apply in thin layers with timed intervals (about 15-20 minutes), always using the top coat on the varnish when not too dry. For a perfect application, you can use the “MAGNUM” handle that allows you to apply the paint with greater precision. REMOVE THE VARNISH WITH ACETONE AND/OR NITRO THINNER.

“NextClear” is a professional two-component high-solid top coat. The glossy “NextClear” is a high-solid and high-gloss 2k top coat “NextClear”, the best solution to touch up a table with spray cans: it is highly resistant due to its high-solid characteristic and the high-gloss gives it maximum brilliance, two fundamental features for resins and wood. The two-component top coat, which shall be applied at the time of use, it’s perfect whenever a very polished resistant finish is necessary: glossy “NextClear” is UV- resistant as well as resistant to aging, against yellowing and against chemical agents. Recommended for resins that do not contain phosphorescent pigment, wood and various types of surfaces. Its unique properties fulfil the requirements for the protection, the sanding and the polishing of resins that do not contain phosphorescent pigment, wood and various types of surfaces. Properties: Scratch-resistant protective finish; Prevents the yellowing of the resin UV-resistant Easy to apply; Usable within 24 hours from activation (the duration can be even longer, depending on where it is stored). Completely dries after 48 hours The coverage of a canister is about 1 square meters. Warning: at first it develops a strong smell, which disappears once dried. Work in a ventilated area. Tips for use: “NextClear” shall be activated only at the time of use. Top coat and hardener are already included in the canister as separate components. To initiate the catalysis procedure, remove the red button from the cap of the canister, turn it upside down and firmly insert the button into the stem on the bottom. Shake the canister very well for a few minutes in order for the hardener to perfectly dissolve. Apply on the lightly sanded surface to allow the attachment, or. Apply 2 layers. The high-gloss top coat completely dries after 24 hours. Use the content of the canister within 24 hours from activation (the duration can be even longer, depending on where it is stored). “NextClear” top coats are marked with the QUALITY EXTRA symbol, which labels all the items produced and tested directly by ResinPro to always ensure maximum performance. REMOVE WITH ACETONE AND/OR NITRO THINNER (before the product has completely dried).

Transparante glanzende tweecomponenten polyurethaanvernis in pot: 100 ml TRANSPARANTE VERNIS + 50 ml KATALYSATOR + 60 ml verdunner. Universele tweedelige kit voor het voorbereiden van een glanzende afwerking. Ideaal voor professionele bescherming van harsen en alle soorten verf. Deze door katalysator geharde transparante beschermlaag is bestand tegen chemicaliën, UV-straling en krassen. De verpakking bevat twee aparte flessen (transparante polyurethaan en katalysator) die bij gebruik gemengd worden. Aanbevolen voor harsen zonder fosforescerend pigment, hout en diverse oppervlakken. Spraygun-kit bevat: Gebruiksvriendelijk spuitpistool Component A Component B (katalysator) 60 ml polyurethaan verdunner Gegradueerd maatglas Unieke eigenschappen die volledig voldoen aan de beschermings-, schuur- en polijstbehoeften van harsen zonder fosforescerend pigment, hout en verschillende oppervlakken. Kenmerken: Beschermende krasbestendige afwerking Voorkomt vergeling van hars Bestand tegen UV-straling Gemakkelijk aan te brengen Glanzende afwerking Volledig droog na 48 uur Bereid altijd alleen de benodigde hoeveelheid voor De dekking van 100 ml vernis met verdunner is ongeveer 1,5–2,5 m². Let op: aanvankelijk een merkbare geur die verdwijnt na droging. Werk in een goed geventileerde ruimte.

De transparante 1K spray "NextGlow K300" is de ideale bescherming voor harsen gemengd met fosforescerende (fotoluminescente) en fluorescerende pigmenten, en fosforescerende verven. Aanbevolen alleen voor harsen gemengd met fosforescerende (fotoluminescente) en fluorescerende pigmenten. Unieke eigenschappen voor bescherming, schuren en polijsten van speciale verven zoals fosforescerend en fluorescerend. Kenmerken: Krasbestendige beschermlaag Verloopt niet door UV-straling Gemakkelijk aan te brengen Meermalig herbruikbaar De beschermlaag is glanzend en egaal en laat UV-straling door, wat essentieel is voor fosforescerende en fluorescerende verven. Fysisch-chemische eigenschappen maken het oppervlak bestand tegen benzine, koolwaterstoffen, alcohol en agressieve reinigers. Ook uitstekend krasbestendig, vergeelt niet en wordt niet aangetast door UV. Geschikt voor binnen- en buitengebruik. Dekking per spuitbus: ca. 1–1,5 m². Kan worden gemaakt met een CFC-vrije drijfgas. Let op: eerst geur bij gebruik die verdwijnt na droging. Gebruik in een goed geventileerde ruimte.