Roestwerende spray voor scheepswerven

GlobalWax Lossingsspray voor Epoxy, Polyurethaan en Acrylharsen GLOBALWAX 200 S Spray is een wasgebaseerd product dat eenvoudig met een spray kan worden aangebracht. ✅ Hittebestendig tot +180 °C [356 °F] Beschrijving: GlobalWax Lossingsspray vormt een wasfilm op de maloppervlakken en modellen, met sterke anti-hechtende eigenschappen en een hoge temperatuurbestendigheid (tot +180 °C [356 °F]). Het is bijzonder aanbevolen voor de voorbereiding van mallen en bekistingen voor het gieten van harsen. U kunt het aanbrengen op hout, metaal, kunststof of zelfs karton – en binnen enkele minuten beschikt u over een perfect anti-hechtend oppervlak om hars of andere mengsels te gieten. 📌 Toepassing: Spray 📌 Kleur: Wit 📌 Inhoud: 400 ml [14,07 oz] ⚠️ WAARSCHUWING: ZEER ONTVLAMBAAR

“NextClear” is a professional two-component high-solid top coat. The professional two-component high-solid matte top coat “NextClear” has a high matting degree (gloss grade 9-12) and it’s highly scratch-resistant: it is used for the matte finish of resin and wooden tables. The matte “NextClear” can be used whenever you need a matte finish resistant to scratches, to aging, against yellowing, against chemical agents and against petrol. Recommended for resins that do not contain phosphorescent pigment, wood and various types of surfaces. Its unique properties fulfil the requirements for the protection, the sanding and the polishing of resins that do not contain phosphorescent pigment, wood and various types of surfaces. Properties: Scratch-resistant protective finish; Prevents the yellowing of the resin UV-resistant Easy to apply; Usable within 24 hours from activation (the duration can be even longer, depending on where it is stored). Completely dries after 48 hours The coverage of a canister is about 1.5 square meters. Warning: at first it develops a strong smell, which disappears once dried. Work in a ventilated area. Tips for use: Matte “NextClear” is packaged in a special spray canister that shall be activated only at the time of use. Top coat and hardener are already included in the canister as separate components; to initiate the catalysis procedure remove the red button from the cap of the canister, turn it upside down and firmly insert the button into the stem on the bottom. Shake the canister very well for a few minutes in order for the hardener to perfectly dissolve. Apply on the lightly sanded surface to allow the attachment. Apply 2 layers: it is essential to apply thin coats because while painting with matte finishes, if too much product builds up, there is the risk not to achieve a polished final result. It is therefore necessary to apply it homogeneously with a constant thickness to get a uniformly matte surface. The matte top coat completely dries after 48 hours (check below for further technical details). Use the content of the canister within 24 hours from activation (the duration can be even longer, depending on where it is stored). “NextClear” top coats are marked with the QUALITY EXTRA symbol, which labels all the items produced and tested directly by VerniciSpray to always ensure maximum performance. REMOVE WITH ACETONE AND/OR NITRO THINNER (before the product has completely dried).

Verhoog de kunst van zelfgemaakte zeep met onze exclusieve Aromas-geuren Onze geuren uit de Aromas-lijn zijn jouw perfecte bondgenoot om zelfgemaakte zepen te creëren die de zintuigen prikkelen. Ontworpen en geproduceerd in Italië en geïnspireerd door de voornaamste parfummerken in Italië en Europa, is dit parfumconcentraat bedoeld om je zepen een onderscheidende en langdurige geur te geven.

“1K NEXTCOLOR K300” top coat is the best product on the market within the category of one-component top coats, which are also known as 1K. Due to its unique physicochemical properties, “NEXTCOLOR K300” is particularly suitable as a polished finish for resins and wood. “NEXTCOLOR K300” stands out for its glossiness, its resistance to scratches and to almost all detergents (even the most aggressive), its non-yellowing and its UV resistance. Recommended for resins that do not contain phosphorescent pigment, wood and various types of surfaces. Its unique properties fulfil the requirements for the protection, the sanding and the polishing of resins that do not contain phosphorescent pigment, wood and various types of surfaces. Properties: Scratch-resistant protective finish; Prevents the yellowing of the resin UV-resistant Easy to apply; Reusable multiple times The coverage of a canister is about 1-1.5 square meters. Warning: at first it develops a strong smell, which disappears once dried. Work in a ventilated area. Use: We suggest to shake well for a few minutes. The temperature of the canister should be 20°/25°C [68/77 F]. Spray the product evenly and crossways on the surface to be painted at a distance of about 15-20 cm [5,90”/7,87”]. To prevent sagging, repeatedly apply in thin layers with timed intervals (about 15-20 minutes), always using the top coat on the varnish when not too dry. For a perfect application, you can use the “MAGNUM” handle that allows you to apply the paint with greater precision. REMOVE THE VARNISH WITH ACETONE AND/OR NITRO THINNER.