Harsgiettechnieken: casting, lamineren, coaten

SUPER OFFER! 32 KG [70,54 LB]: Non-toxic Ultra Transparent Epoxy Resin. IDEAL for + DIY + Surface coating + Wooden tables + Boat care and maintenance Water-Clear – Two-component epoxy system highly efficient for film application (1 mm [0,03”]) and castings up to 3 cm [1,18”] thickness. Besides the high transparency (water-clear) and the self-levelling properties, multipurpose transparent epoxy is a very versatile product for DIY and casting in silicone moulds. Furthermore, it guarantees a good mechanical seal for reinforcement and applications with carbon fibre. The product features a low viscosity that reduces the appearance of unaesthetic air bubbles after hardening and facilitates the impregnation of carbon fibre. The excellent resistance to ambient humidity guarantees a glossy and transparent surface. The product is compatible with the major colouring pastes on the market. Transparent Epoxy resin is a two-component product based on epoxy resins and relative amine hardener. The main features of this product are:  high transparency,  excellent mechanical strength,  good chemical resistance,  high impregnation and reinforcement of technical fabrics,  long working time,  glossy and self-levelling surface.  heat resistance - up to 70 C [158 F] The product can be coloured with any epoxy dye (both in paste and powder) in a percentage ranging from 0.1% to 2.0%). It can also be thickened by the use of aggregates such as powders and fumed silica. Thanks to these features, the transparent epoxy resin is ideal for the following applications: Modelling; Artistic creations; Fiberglass repairs; Outdoor protective coatings; Artistic flooring; Boat care and maintenance; Impregnation of technical fabrics (fiberglass, carbon fibre, Kevlar). Technical data: Pot-life (150 gr at 30 C) [0,33 lb at 86 F]: 1h20 ′, Full catalysis after 24h, Film catalysis (1 mm at 30 C) [0,03” at 86 F]: 6h 00 ′. Heat resistance - up to 70 C [158 F]

Liquid Mold – Liquid Casting Siliconenrubber Uiterst zacht gietbaar siliconenrubber (15/20 shore A) met hoge scheurweerstand, dat overal kan doordringen en elk detail kan weergeven. Wit van kleur, geschikt voor het maken van perfecte mallen van juwelen, schaalmodellen, decoraties en zelfs middelgrote standbeelden. Door zijn zachtheid kunnen de meest complexe modellen worden verwijderd zonder risico op breuk of scheuren. Bovendien heeft het product een certificaat van niet-giftigheid bij contact met de huid, post-katalyse, waardoor u de vormen veilig kunt hanteren. Zeer zacht: verwijder de meest complexe creaties zonder risico op breuk of scheuren; Compatibel met Hars, Was, Gips, Metaal met een laag smeltpunt, Zeep of Cement; Ideaal voor het maken van 3D-mallen met de SGUANTO techniek. Lange bewerkingstijd om maximale nauwkeurigheid van de mal te garanderen; Duurzaam: garandeert tot 50 perfecte afgietsels uit dezelfde mal; Wit gekleurd, kan naar wens gekleurd worden; Gecertificeerd niet-giftig post-katalytisch voor huidcontact. Wilt u uw modellen natuurgetrouw reproduceren, zelfs met complexe vormen en sterke ondersnijdingen? Liquid Mod 15/20 shores zal u helpen snel en gemakkelijk een ideaal resultaat te bereiken! Vloeibaar Siliconenrubber 15/20 SHORES: Voor zeer gedetailleerde mallen en afgietsels, zelfs met complexe ondersnijdingen.

"RAPHAEL" KIT for Pour Paint & Resin Art Create your unique painting with the "RAPHAEL" kit. Experience the countless mixtures and design the perfect artwork! The "RAPHAEL" KIT includes: - TRANSPARENT RESIN FOR ARTWORK AND DIY 1.66 KG [3,65 LB] - NEON PIGMENTS SET ART PRO, the epoxy resin for the artistic sector: thanks to its special formula and its dense structure, it allows you to create paintings with the "pour paint" and liquid paint technique. It does not leak out from the working surface, slowly reaching the corners of the frame. ART PRO preserves your original design and prevents any possible modification due to the casting of the resin: because of its special formula, the layers of colours do not expand and do not mix (unless you deliberately intervene), faithfully keeping with your creative idea!

HIGH-QUALITY SILICONE MOULD FOR HANDCRAFTS Easy to use, highly polished and perfect for creating beautiful jewellery or decorations. Suitable to be used with soap, plaster, resin, ice, ceramic, clay, wax and other casting materials proper for DIY. Moulds for objects, jewels and chocolate. DO-IT-YOURSELF. Material: Silicone, Colour: Semi-transparent; Reusable, Non-stick, Easy to use and clean.   Measurements: Mould - 5.0 x 3.5 CM Ready product - 4.3 x 3 CM Warning: do not use aggressive solvents, High-quality moulds, heat-resistant: -40°C to + 210°C [-104° F to +410° F]