![Transparent spray 400 ml [14,07 oz]](data:image/svg+xml,%3Csvg%20xmlns='http://www.w3.org/2000/svg'%20viewBox='0%200%201%201'%3E%3C/svg%3E)
“NextClear” is a professional two-component high-solid top coat. The glossy “NextClear” is a high-solid and high-gloss 2k top coat “NextClear”, the best solution to touch up a table with spray cans: it is highly resistant due to its high-solid characteristic and the high-gloss gives it maximum brilliance, two fundamental features for resins and wood. The two-component top coat, which shall be applied at the time of use, it’s perfect whenever a very polished resistant finish is necessary: glossy “NextClear” is UV- resistant as well as resistant to aging, against yellowing and against chemical agents. Recommended for resins that do not contain phosphorescent pigment, wood and various types of surfaces. Its unique properties fulfil the requirements for the protection, the sanding and the polishing of resins that do not contain phosphorescent pigment, wood and various types of surfaces. Properties: Scratch-resistant protective finish; Prevents the yellowing of the resin UV-resistant Easy to apply; Usable within 24 hours from activation (the duration can be even longer, depending on where it is stored). Completely dries after 48 hours The coverage of a canister is about 1 square meters. Warning: at first it develops a strong smell, which disappears once dried. Work in a ventilated area. Tips for use: “NextClear” shall be activated only at the time of use. Top coat and hardener are already included in the canister as separate components. To initiate the catalysis procedure, remove the red button from the cap of the canister, turn it upside down and firmly insert the button into the stem on the bottom. Shake the canister very well for a few minutes in order for the hardener to perfectly dissolve. Apply on the lightly sanded surface to allow the attachment, or. Apply 2 layers. The high-gloss top coat completely dries after 24 hours. Use the content of the canister within 24 hours from activation (the duration can be even longer, depending on where it is stored). “NextClear” top coats are marked with the QUALITY EXTRA symbol, which labels all the items produced and tested directly by ResinPro to always ensure maximum performance. REMOVE WITH ACETONE AND/OR NITRO THINNER (before the product has completely dried).
€31,67
![TRANSPARENT EPOXY RESIN 8 KG [17,63 LB]](data:image/svg+xml,%3Csvg%20xmlns='http://www.w3.org/2000/svg'%20viewBox='0%200%20768%20717'%3E%3C/svg%3E)
Water-Clear – Two-component epoxy system (composed of 5 kg [11,02 lb] of resin and 3 kg [6,61 lb] of hardener) highly efficient for film application (1 mm [0,03”]) and castings up to 2 cm [0,78”] thickness. Besides the high transparency (water-clear) and the self-levelling properties, multipurpose transparent epoxy is a very versatile product for DIY and casting in silicone moulds. Furthermore, it guarantees a good mechanical seal for reinforcement and applications with carbon fibre. The product features a low viscosity that reduces the appearance of unaesthetic air bubbles after hardening and facilitates the impregnation of carbon fibre. The excellent resistance to ambient humidity guarantees a glossy and transparent surface. The product is compatible with the major colouring pastes on the market. Transparent Epoxy resin is a two-component product based on epoxy resins and relative amine hardener. The main features of this product are: high transparency, excellent mechanical strength, good chemical resistance, high impregnation and reinforcement of technical fabrics, long working time, glossy and self-levelling surface. The product can be coloured with any epoxy dye (both in paste and powder) in a percentage ranging from 0.1% to 2.0%). It can also be thickened by the use of aggregates such as powders and fumed silica. Thanks to these features, the transparent epoxy resin is ideal for the following applications: Modelling; Artistic creations; Fiberglass repairs; Outdoor protective coatings; Artistic flooring; Boat care and maintenance; Impregnation of technical fabrics (fiberglass, carbon fibre, Kevlar). Pot-life (150 gr at 30 C) [0,33 lb at 86 F]: 1h20 ′, Full catalysis after 24h, Film catalysis (1 mm at 30 C) [0,03” at 86 F]: 6h 00 ′.
€219,62
KIT EPOXY TABLE FINALMENTE IL KIT COMPLETO PER CREARE IL TUO TAVOLO IN LEGNO E RESINA! Troverai tutto l’occorrente per creare il contenitore, la resina e la lucidatura finale Incluse le istruzioni dettagliate per creare la cassaforma, ed i trucchi per colare la resina, in pochi semplici passi. Grazie alla nuova pellicola distaccante “Shiny Shield” creare un tavolo non è mai stato cosi semplice. Non hai più scuse, scegli la dimensione che fa per te: Beginner , PRO o … XXL! KIT EPOXYTABLE BEGINNER PER CREARE IL TAVOLO IN LEGNO E RESINA EPOSSIDICA FIUME CON ISTRUZIONI DETTAGLIATE Non hai esperienza ma hai sempre voluto un bellissimo e moderno tavolo in legno e resina? Ecco finalmente la soluzione, senza spendere una fortuna! Il kit BEGINNER ti permetterà di creare facilmente e velocemente il tuo tavolo in legno e resina. Il KIT BEGINNER comprende: 8 kg resina epossidica Trasparente per colate fino a 2 cm Pellicola distaccante, lucida “Shiny Shield” (sufficienti per una superficie di 0,5 m2) Silicone in pasta atossico per sigillare (500g) KIT lucidante (set dischi lucidanti + pasta lucidante professionale 3M) Istruzioni dettagliate per creare passo passo la cassaforma e colare la resina. Il kit BEGINNER è sufficiente per creare un tavolo con una superficie di 0,5 m2 (es. 50 cm x 90 cm, spessore 2cm)*. Il KIT PRO comprende: 16 kg resina epossidica Trasparente per colate fino a 2 cm Pellicola distaccante, lucida “Shiny Shield” (sufficienti per una superficie di 1 m2) Silicone in pasta atossico per sigillare (500g) KIT lucidante (set dischi lucidanti + pasta lucidante professionale 3M) Istruzioni dettagliate per creare passo passo la cassaforma e colare la resina. Il kit PRO è sufficiente per creare un tavolo con una superficie di 1 m2 (es. 120 cm x 80cm, spessore 2cm)*. Il KIT XXL comprende: 32 kg resina epossidica Trasparente per colate fino a 2 cm Pellicola distaccante, lucida “Shiny Shield” (sufficienti per una superficie di 2 m2) Silicone in pasta atossico per sigillare (500g) KIT lucidante (set dischi lucidanti + pasta lucidante professionale 3M) Istruzioni dettagliate per creare passo passo la cassaforma e colare la resina. Il kit PRO è sufficiente per creare un tavolo con una superficie di 2 m2 (es. 110 cm x 180cm, spessore 2cm)*. *Le quantità sono calcolate simulando un tavolo “classico” in cui il volume è suddiviso in 2/3 legno ed 1/3 resina: Per ogni dubbio od un semplice consiglio contatta il reparto tecnico ResinPro al 333 4819266!
€135,00
“NextClear” is a professional two-component high-solid top coat. The professional two-component high-solid matte top coat “NextClear” has a high matting degree (gloss grade 9-12) and it’s highly scratch-resistant: it is used for the matte finish of resin and wooden tables. The matte “NextClear” can be used whenever you need a matte finish resistant to scratches, to aging, against yellowing, against chemical agents and against petrol. Recommended for resins that do not contain phosphorescent pigment, wood and various types of surfaces. Its unique properties fulfil the requirements for the protection, the sanding and the polishing of resins that do not contain phosphorescent pigment, wood and various types of surfaces. Properties: Scratch-resistant protective finish; Prevents the yellowing of the resin UV-resistant Easy to apply; Usable within 24 hours from activation (the duration can be even longer, depending on where it is stored). Completely dries after 48 hours The coverage of a canister is about 1.5 square meters. Warning: at first it develops a strong smell, which disappears once dried. Work in a ventilated area. Tips for use: Matte “NextClear” is packaged in a special spray canister that shall be activated only at the time of use. Top coat and hardener are already included in the canister as separate components; to initiate the catalysis procedure remove the red button from the cap of the canister, turn it upside down and firmly insert the button into the stem on the bottom. Shake the canister very well for a few minutes in order for the hardener to perfectly dissolve. Apply on the lightly sanded surface to allow the attachment. Apply 2 layers: it is essential to apply thin coats because while painting with matte finishes, if too much product builds up, there is the risk not to achieve a polished final result. It is therefore necessary to apply it homogeneously with a constant thickness to get a uniformly matte surface. The matte top coat completely dries after 48 hours (check below for further technical details). Use the content of the canister within 24 hours from activation (the duration can be even longer, depending on where it is stored). “NextClear” top coats are marked with the QUALITY EXTRA symbol, which labels all the items produced and tested directly by VerniciSpray to always ensure maximum performance. REMOVE WITH ACETONE AND/OR NITRO THINNER (before the product has completely dried).
€39,28
![Transparent spray 400 ml [14,07 oz]](https://resinpro.nl/wp-content/uploads/2019/07/Trasparente-bicomponente-alto-solido-alto-lucido-spray.jpg)
![TRANSPARENT EPOXY RESIN 8 KG [17,63 LB]](https://resinpro.nl/wp-content/uploads/2019/07/multiuso8kg-768x717.jpg)
![Single-use Matte spray 400 ml [14,07 oz]](https://resinpro.nl/wp-content/uploads/2019/07/trasparente-opaco-bicomponente-spray.jpg)
Gratis verzending boven € 39
Volg je pakket!
Google
Facebook
