Glanzende spray monocomponent decoraties meubels

GlobalWax Lossingsspray  voor Epoxy, Polyurethaan en Acrylharsen GLOBALWAX 200 S Spray is een wasgebaseerd product dat eenvoudig met een spray kan worden aangebracht. ✅ Hittebestendig tot +180 °C [356 °F] Beschrijving: GlobalWax Lossingsspray vormt een wasfilm op de maloppervlakken en modellen, met sterke anti-hechtende eigenschappen en een hoge temperatuurbestendigheid (tot +180 °C [356 °F]). Het is bijzonder aanbevolen voor de voorbereiding van mallen en bekistingen voor het gieten van harsen. U kunt het aanbrengen op hout, metaal, kunststof of zelfs karton – en binnen enkele minuten beschikt u over een perfect anti-hechtend oppervlak om hars of andere mengsels te gieten. 📌 Toepassing: Spray 📌 Kleur: Wit 📌 Inhoud: 400 ml [14,07 oz] ⚠️ WAARSCHUWING: ZEER ONTVLAMBAAR

“NextClear” is a professional two-component high-solid top coat. The glossy “NextClear” is a high-solid and high-gloss 2k top coat “NextClear”, the best solution to touch up a table with spray cans: it is highly resistant due to its high-solid characteristic and the high-gloss gives it maximum brilliance, two fundamental features for resins and wood. The two-component top coat, which shall be applied at the time of use, it’s perfect whenever a very polished resistant finish is necessary: glossy “NextClear” is UV- resistant as well as resistant to aging, against yellowing and against chemical agents. Recommended for resins that do not contain phosphorescent pigment, wood and various types of surfaces. Its unique properties fulfil the requirements for the protection, the sanding and the polishing of resins that do not contain phosphorescent pigment, wood and various types of surfaces. Properties: Scratch-resistant protective finish; Prevents the yellowing of the resin UV-resistant Easy to apply; Usable within 24 hours from activation (the duration can be even longer, depending on where it is stored). Completely dries after 48 hours The coverage of a canister is about 1 square meters. Warning: at first it develops a strong smell, which disappears once dried. Work in a ventilated area. Tips for use: “NextClear” shall be activated only at the time of use. Top coat and hardener are already included in the canister as separate components. To initiate the catalysis procedure, remove the red button from the cap of the canister, turn it upside down and firmly insert the button into the stem on the bottom. Shake the canister very well for a few minutes in order for the hardener to perfectly dissolve. Apply on the lightly sanded surface to allow the attachment, or. Apply 2 layers. The high-gloss top coat completely dries after 24 hours. Use the content of the canister within 24 hours from activation (the duration can be even longer, depending on where it is stored). “NextClear” top coats are marked with the QUALITY EXTRA symbol, which labels all the items produced and tested directly by ResinPro to always ensure maximum performance. REMOVE WITH ACETONE AND/OR NITRO THINNER (before the product has completely dried).

Transparante glanzende tweecomponenten polyurethaanvernis in pot: 100 ml TRANSPARANTE VERNIS + 50 ml KATALYSATOR + 60 ml verdunner. Universele tweedelige kit voor het voorbereiden van een glanzende afwerking. Ideaal voor professionele bescherming van harsen en alle soorten verf. Deze door katalysator geharde transparante beschermlaag is bestand tegen chemicaliën, UV-straling en krassen. De verpakking bevat twee aparte flessen (transparante polyurethaan en katalysator) die bij gebruik gemengd worden. Aanbevolen voor harsen zonder fosforescerend pigment, hout en diverse oppervlakken. Spraygun-kit bevat: Gebruiksvriendelijk spuitpistool Component A Component B (katalysator) 60 ml polyurethaan verdunner Gegradueerd maatglas Unieke eigenschappen die volledig voldoen aan de beschermings-, schuur- en polijstbehoeften van harsen zonder fosforescerend pigment, hout en verschillende oppervlakken. Kenmerken: Beschermende krasbestendige afwerking Voorkomt vergeling van hars Bestand tegen UV-straling Gemakkelijk aan te brengen Glanzende afwerking Volledig droog na 48 uur Bereid altijd alleen de benodigde hoeveelheid voor De dekking van 100 ml vernis met verdunner is ongeveer 1,5–2,5 m². Let op: aanvankelijk een merkbare geur die verdwijnt na droging. Werk in een goed geventileerde ruimte.

“NextClear” is a professional two-component high-solid top coat. The professional two-component high-solid matte top coat “NextClear” has a high matting degree (gloss grade 9-12) and it’s highly scratch-resistant: it is used for the matte finish of resin and wooden tables. The matte “NextClear” can be used whenever you need a matte finish resistant to scratches, to aging, against yellowing, against chemical agents and against petrol. Recommended for resins that do not contain phosphorescent pigment, wood and various types of surfaces. Its unique properties fulfil the requirements for the protection, the sanding and the polishing of resins that do not contain phosphorescent pigment, wood and various types of surfaces. Properties: Scratch-resistant protective finish; Prevents the yellowing of the resin UV-resistant Easy to apply; Usable within 24 hours from activation (the duration can be even longer, depending on where it is stored). Completely dries after 48 hours The coverage of a canister is about 1.5 square meters. Warning: at first it develops a strong smell, which disappears once dried. Work in a ventilated area. Tips for use: Matte “NextClear” is packaged in a special spray canister that shall be activated only at the time of use. Top coat and hardener are already included in the canister as separate components; to initiate the catalysis procedure remove the red button from the cap of the canister, turn it upside down and firmly insert the button into the stem on the bottom. Shake the canister very well for a few minutes in order for the hardener to perfectly dissolve. Apply on the lightly sanded surface to allow the attachment. Apply 2 layers: it is essential to apply thin coats because while painting with matte finishes, if too much product builds up, there is the risk not to achieve a polished final result. It is therefore necessary to apply it homogeneously with a constant thickness to get a uniformly matte surface. The matte top coat completely dries after 48 hours (check below for further technical details). Use the content of the canister within 24 hours from activation (the duration can be even longer, depending on where it is stored). “NextClear” top coats are marked with the QUALITY EXTRA symbol, which labels all the items produced and tested directly by VerniciSpray to always ensure maximum performance. REMOVE WITH ACETONE AND/OR NITRO THINNER (before the product has completely dried).