Veiligheidscoating Clear

NextClear 2K is door zijn exclusieve fysisch-chemische eigenschappen ideaal als glanzende afwerking voor hars en hout. Het product is krasbestendig, bestand tegen vrijwel alle reinigers, vergeelt niet en biedt UV-bescherming. NextClear is een professionele transparante tweecomponentenlak. Het is een zeer sterke en glanzende 2K spray, perfect voor het retoucheren van tafels met spuitbussen. De hoge sterkte zorgt voor duurzame bescherming, de glans voor een maximale uitstraling. De transparante 2K spray kan worden geactiveerd bij gebruik en is geschikt voor alle toepassingen die een zeer sterke, glanzende afwerking vereisen. NextClear beschermt tegen UV, veroudering, vergeling en chemische invloeden. Aanbevolen voor harsen zonder fosforescerende pigmenten, hout en diverse oppervlakken. Kenmerken: – Krasbestendige beschermlaag – Voorkomt vergeling van hars – UV-bestendig – Makkelijk aan te brengen – Gebruik binnen 24 uur na activering (afhankelijk van opslag kan dit langer zijn) – Volledig droog na 24 uur Dekking per spraybus: ca. 1 m². Let op: In het begin kan er een geur zijn die verdwijnt na droging. Gebruik in goed geventileerde ruimtes.

NextClear is de professionele tweecomponentenlak met hoge sterkte. De bicomponent transparante NextClear matte lak heeft een hoge dekkingsgraad (glansniveau 9-12) en een hoge krasbestendigheid. Het wordt gebruikt voor matte afwerking van resin- en houten tafels. NextClear mat kan overal worden toegepast waar een matte afwerking nodig is die bestand is tegen krassen, veroudering, vergeling, chemicaliën en benzine. Aanbevolen voor harsen zonder fluorescerend pigment, hout en diverse soorten oppervlakken. De unieke eigenschappen voldoen volledig aan de behoeften voor bescherming, schuren en matte afwerking van harsen zonder fluorescerend pigment, hout en verschillende soorten oppervlakken. Kenmerken: Beschermende krasbestendige afwerking Voorkomt vergeling van hars Bestand tegen UV-straling Makkelijk aan te brengen Te gebruiken binnen 24 uur na activering (de houdbaarheid kan langer zijn afhankelijk van de opslagplaats) Volledige droging binnen 48 uur De dekking van één spraybus is ongeveer 1,5 m². Let op: het ontwikkelt aanvankelijk een waarneembare geur die verdwijnt zodra het droog is. Werk in een goed geventileerde ruimte.

“NextClear” is a professional two-component high-solid top coat. The glossy “NextClear” is a high-solid and high-gloss 2k top coat “NextClear”, the best solution to touch up a table with spray cans: it is highly resistant due to its high-solid characteristic and the high-gloss gives it maximum brilliance, two fundamental features for resins and wood. The two-component top coat, which shall be applied at the time of use, it’s perfect whenever a very polished resistant finish is necessary: glossy “NextClear” is UV- resistant as well as resistant to aging, against yellowing and against chemical agents. Recommended for resins that do not contain phosphorescent pigment, wood and various types of surfaces. Its unique properties fulfil the requirements for the protection, the sanding and the polishing of resins that do not contain phosphorescent pigment, wood and various types of surfaces. Properties: Scratch-resistant protective finish; Prevents the yellowing of the resin UV-resistant Easy to apply; Usable within 24 hours from activation (the duration can be even longer, depending on where it is stored). Completely dries after 48 hours The coverage of a canister is about 1 square meters. Warning: at first it develops a strong smell, which disappears once dried. Work in a ventilated area. Tips for use: “NextClear” shall be activated only at the time of use. Top coat and hardener are already included in the canister as separate components. To initiate the catalysis procedure, remove the red button from the cap of the canister, turn it upside down and firmly insert the button into the stem on the bottom. Shake the canister very well for a few minutes in order for the hardener to perfectly dissolve. Apply on the lightly sanded surface to allow the attachment, or. Apply 2 layers. The high-gloss top coat completely dries after 24 hours. Use the content of the canister within 24 hours from activation (the duration can be even longer, depending on where it is stored). “NextClear” top coats are marked with the QUALITY EXTRA symbol, which labels all the items produced and tested directly by ResinPro to always ensure maximum performance. REMOVE WITH ACETONE AND/OR NITRO THINNER (before the product has completely dried).

“NextClear” is a professional two-component high-solid top coat. The professional two-component high-solid matte top coat “NextClear” has a high matting degree (gloss grade 9-12) and it’s highly scratch-resistant: it is used for the matte finish of resin and wooden tables. The matte “NextClear” can be used whenever you need a matte finish resistant to scratches, to aging, against yellowing, against chemical agents and against petrol. Recommended for resins that do not contain phosphorescent pigment, wood and various types of surfaces. Its unique properties fulfil the requirements for the protection, the sanding and the polishing of resins that do not contain phosphorescent pigment, wood and various types of surfaces. Properties: Scratch-resistant protective finish; Prevents the yellowing of the resin UV-resistant Easy to apply; Usable within 24 hours from activation (the duration can be even longer, depending on where it is stored). Completely dries after 48 hours The coverage of a canister is about 1.5 square meters. Warning: at first it develops a strong smell, which disappears once dried. Work in a ventilated area. Tips for use: Matte “NextClear” is packaged in a special spray canister that shall be activated only at the time of use. Top coat and hardener are already included in the canister as separate components; to initiate the catalysis procedure remove the red button from the cap of the canister, turn it upside down and firmly insert the button into the stem on the bottom. Shake the canister very well for a few minutes in order for the hardener to perfectly dissolve. Apply on the lightly sanded surface to allow the attachment. Apply 2 layers: it is essential to apply thin coats because while painting with matte finishes, if too much product builds up, there is the risk not to achieve a polished final result. It is therefore necessary to apply it homogeneously with a constant thickness to get a uniformly matte surface. The matte top coat completely dries after 48 hours (check below for further technical details). Use the content of the canister within 24 hours from activation (the duration can be even longer, depending on where it is stored). “NextClear” top coats are marked with the QUALITY EXTRA symbol, which labels all the items produced and tested directly by VerniciSpray to always ensure maximum performance. REMOVE WITH ACETONE AND/OR NITRO THINNER (before the product has completely dried).